ZyXEL Communications VMG4825-B10A User Manual

1/2
Copyright © 2015 ZyXEL Communications Corp. All Rights Reserved
Connect computer using the yellow
Ethernet cable.
VMG4825-B10A
WiFi-N/AC VDSL2 4-port Bonding Combo
WAN Gateway
Internet Setup
Username: admin
Password: 1234
Quick Start
IP Address: 192.168.1.1
Hardware Connections
2
4
1
Check LEDs.
Connect the power adapter.
5
Connect gateway modem (1-a) using
an Ethernet cable.
OR
Connect a DSL splitter (1-b) using the
gray telephone cable.
4
INTERNET
2
5
Connect 3G dongle.
3
1-a
1-b
3
USB
POWER
WAN
ETHERNET
DSL
Quick Start Guide
Internet is not ready.
Go to Internet Setup.
Internet is ready.
Go to Wireless Setup.
INTERNET
OFF
INTERNET
ON

ZyXEL Communications VMG4825-B10A Specifications

General

Brand	ZyXEL Communications
Model	VMG4825-B10A
Category	Gateway
Language	English

Summary

Hardware Connections

Connect Gateway Modem or DSL Splitter

Connects modem via Ethernet or DSL splitter via telephone cable to the gateway.

Connect Computer for Setup

Connects a computer using a yellow Ethernet cable for initial configuration.

Connect 3G Dongle

Connects a 3G dongle to the USB port for mobile broadband.

Connect Power Adapter

Connects the device to a power outlet using the provided power adapter.

Check Device LEDs

Verifies the status of essential LEDs (Power, DSL, Internet, WiFi) for device operation.

Internet Setup and Initial Access

Accessing Setup via IP Address

Navigates to the web-based configurator using the default IP address 192.168.1.1.

Login Credentials

Enters default username 'admin' and password '1234' to access the device interface.

Quick Start Wizard

Initiates a guided setup process for essential device configurations.

Wireless Setup Methods

WPS Wireless Connection

Connects wireless devices by pressing WPS buttons on router and client.

Manual Wireless Connection

Connects by finding the device's SSID and entering the wireless key from the sticker.

Safety Warnings