Do you have a question about the ZyXEL Communications VMG3925-B10B and is the answer not in the manual?
Brand | ZyXEL Communications |
---|---|
Model | VMG3925-B10B |
Category | Gateway |
Language | English |
Connect DSL port to a DSL splitter or WAN port to an existing modem or router.
Connect computer using the yellow Ethernet cable.
Connect power and press the power button.
Check device LEDs for status indicators.
Access the device via IP address and launch the Quick Start wizard for basic settings.
Connect securely using the WPS button on the device and client.
Find the device SSID and enter the Wireless key to connect.
Connect the stand to the device as shown in the diagram.
Place the device vertically on a smooth level surface.
Information on proper disposal and recycling of the product and battery.
Official statement confirming the device meets regulatory standards.