Quick Start Guide
VMG8924-B10D/VMG8924-B30D
Dual Band Wireless AC/N VDSL2 VoIP
Combo WAN Gigabit IAD
ENGLISH
Use an Ethernet cable to connect the WAN port to a
gateway modem (1-a).
OR
Use the gray phone cable to connect the DSL port to a
DSL splitter (1-b) or directly to the telephone wall outlet.
Check the LEDs.
INTERNET LED (5-a)
ON - The Internet is ready. Go to Wireless Setup.
OFF - The Internet is not ready. Go to Internet Setup.
PHONE LED (5-b)
ON - The VoIP registration is complete.
OFF - The VoIP registration is not complete. Configure VoIP
settings.
EN
1
Configuring Your VMG8924-B10D/VMG8924-B30D
Open a web brower and go to http://192.168.1.1
Enter the default User Name (admin) and Password (1234), and
then click Login.
Connect a computer to the LAN port using the yellow
Ethernet cable.
Connect a phone to the phone port using the phone cable.
Connect the power cable to the modem and press the power
button.
EN
2
3
4
EN
5
VMG8924-B10D/VMG8924-B30D
User Name
Password 1234
admin
1
Hardware Connections
LAN PHONE1
Internet Setup
Login
User Name : admin
Password : 1234
(default)
http://192.168.1.1
POWER
POWER ON
3 4
1
5
WAN
1-a
DSL
OR
INTERNET
ON
INTERNET
OFF
PHONE1
OFF
PHONE1
ON
1-b
2
ON/OFF
5-a 5-b
1/2
To Next Page
Need help?
General
