Quick Start Guide
ENGLISH
1
2
1
2
Mark two holes on the wall at the distance of 82mm. Insert the
screw anchors and screws to fasten the bracket.
Attach your VMG8924-B10D/VMG8924-B30D to the bracket
fastened on the wall.
Make sure the screws are fastened well enough to hold the
weight of your VMG8924-B10D/VMG8924-B30D.
WPS ON
3
Wireless Setup
WPS
Press the WPS button until the WiFi 2.4G and 5G LEDs light
up in orange.
Press the WPS button on the client.
No WPS
The SSID and Wireless key are on the device sticker.
Find the device with this SSID. Enter the Wireless key to
connect.
1
2
3
Connect the stand carefully as shown.
Place the device vertically on a smooth level surface.
1
2
WiFi 2.4G
ON
WiFi 5G
ON
/ WPS
Wireless Setup
/ NO WPS
1
1
2
2
More than 5 seconds.
within
minutes
2
5 seconds
WPS
Wi-Fi Setting
SSID (2.4GHz)
SSID (5-GHz)
Wireless key
Zyxel_xxxx
Zyxel_xxxx_5G
XXXXXXXXXX
Desktop Installation
x2x2
SSID (2.4GHz)
Wireless key
XXXXXXXXXX
Zyxel_xxxx
1
Wall Mounting
2
1
2
82mm
Copyright © 2017 Zyxel Communications Corp. All Rights Reserved.
See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.
2/2
VMG8924-B10D/VMG8924-B30D
Dual Band Wireless AC/N VDSL2 VoIP
Combo WAN Gigabit IAD
To Previous Page
Loading...
