Chapter 1 Introducing the VOP1372G
VOP1372G-61 User’s Guide
16
The following table describes the port labels on the front panel.
The following table describes the LED indicators on the front panel of the VOP.
1.4 Default Settings
Refer to your MSC’s User’s Guide for information on default settings.
Table 3 Front Panel Ports
LABEL DESCRIPTION
CONSOLE For troubleshooting purposes, this mini RJ-11port connects to a computer when the
line card is not manageable from the MSC.
1-24, 25-48, 49-72 These Telco-50 connectors are for connecting the VOP to the splitter cards.
Table 4 LED Descriptions
LED COLOR STATUS DESCRIPTION
PWR Green On The line card is turned on.
Off The line card is off.
SYS Green Blinking The line card is rebooting and performing self-diagnostic tests.
On The line card is on and functioning properly.
Off The power is off, or the line card is malfunctioning.
ALM Red On The temperature or voltage is outside the safe range, or there is a hardware
failure.
Off The temperature or voltage is inside the safe range and the VOP is functioning
normally.
To Next Page
Loading...