Set Local Policy to be Spoke_Branch_B_LOCAL and Remote Policy to Hub_HQ
which are newly created. Click OK.
CONFIGURATION > VPN > IPSec VPN > VPN Connection > Policy
Go to Network > Routing > Policy Route to add a Policy Route to allow traffic from
Spoke_Branch_B to Spoke_Branch_A.
Click Create new Object and set the address to be the local network behind the
Spoke_Branch_A. Select Source Address to be the local network behind the
Spoke_Branch_B. Then, scroll down the Destination Address list to choose the
newly created Spoke_Branch_A_LOCAL address. Click OK.
Network > Routing > Policy Route
To Next Page
Loading...
