PC behind ZyWALL/USG > Window 7 > cmd > ping 192.168.10.33
PC behind WatchGuard> Window 7 > cmd > ping 192.168.1.33
What Could Go Wrong?
If you see below [info] or [error] log message, please check ZyWALL/USG Phase 1
Settings. Both ZyWALL/USG and WatchGuard must use the same Pre-Shared Key,
Encryption, Authentication method, DH key group and ID Type to establish the
IKE SA.
MONITOR > Log
If you see that Phase 1 IKE SA process done but still get below [info] log message,
To Next Page
Loading...
