be the IKE using Preshared Secret. Type the ZyWALL/USG's WAN IP Address to be
the IPsec Primary Gateway Name or Address (in the example, 172.10.120.11).
In the IKE Authentication section, set the Shared Secret to be the same as your
ZyWALL/USG’s Pre-Shared Key. Then, set the Local IKE ID and the Peer IKE ID to
match your ZyWALL/USG’s VPN Gateway > Show Advanced Settings >
Authentication > Local ID Type and Peer ID Type.
VPN > Settings > VPN Policies > General
In the SonicWALL VPN > Settings > VPN Policies > Network, choose Local Network
to be the IP address range of the network connected to the SonicWALL (found
under SonicWALL > Network > Interfaces > LAN).
To Next Page
Loading...
