CONFIGURATION > VPN > IPSec VPN > VPN Gateway > Show Advanced
Settings > Authentication > Peer ID Type
Go to Configuration > VPN > IPSec VPN > VPN Gateway > Gateway Settings. Set
My Address to be Domain Name/IP “0.0.0.0” (ZyWALL/USG will dial-up with the
active WAN interface first). Set Peer Gateway Address > Static Address > Primary
to be ZyWALL/USG_HQ WAN1 IP address and Secondary to be ZyWALL/USG_HQ
WAN2 IP address.
Configuration > VPN > IPSec VPN > VPN Gateway > Gateway Settings
To Next Page
Loading...
