Set up the ZyWALL/USG IPSec VPN Tunnel
In the ZyWALL/USG, go to CONFIGURATION >Quick Setup > VPN Setup Wizard, use
the VPN Settings for Configuration Provisioning wizard to create a VPN rule that
can be used with the ZyWALL IPSec VPN Client. Click Next.
Quick Setup > VPN Setup Wizard > Welcome
Choose Express to create a VPN rule with the default phase 1 and phase 2
settings and use a pre-shared key to be the authentication method. Click Next.
Quick Setup > VPN Setup Wizard > Wizard Type
Type the Rule Name used to identify this VPN connection (and VPN gateway).
You may use 1-31 alphanumeric characters. This value is case-sensitive. Click
Next.
To Next Page
Loading...
