Set up notification for 2 factor authentication
In the ZyWALL/USG, go to CONFIGURATION > System > Notification > Mail Server
1. Type the name or IP address of the SMTP server.
2. Enter the service port for SMTP.
3. Type the e-mail address from which the outgoing e-mail is delivered.
4. Select this check box if it is necessary to provide a user name and password to
the SMTP server.
5. Click “Apply” button to save your changes to the Zyxel Device.
Go to 2
nd
tab CONFIGURATION > System > Notification > SMS, in this scenario, we will
use email and SMS for 2 factor authentication.
1. Select the check box “Enable SMS” to turn on the SMS service.
2. Enter the default country code for the mobile phone number to which you
want to send SMS messages.
3. Enter the user name and password for your ViaNett account.
4. Click “Apply” button to save your changes to the Zyxel Device.
To Next Page
Loading...
