Internet service providers (ISPs). Connect your ISP devices to your ZyWALL/USG
WAN port, select I have two ISPs if you want to configure two Internet connections
or leave it cleared to configure just one.
Choose the Encapsulation option to be Ethernet, leave Zone as default setting
Internet connection belongs to the WAN zone.
In the IP Address Assignment section, select Auto if your ISP did not assign you a
fixed IP address or select Static if your ISP did assign you a fixed IP address. Click
Next.
Installation Setup Wizard > Welcome > Internet Access
Enter the IP Address, IP Subnet Mask and Gateway IP Address exactly as given by
To Next Page
Loading...
