NWA / WAC Series User’s Guide
130
CHAPTER 12
WDS Profile
12.1 Overview
This chapter shows you how to configure WDS (Wireless Distribution System) profiles for the NWA/WAC to
form a WDS with other APs.
12.1.1 What You Can Do in this Chapter
The WDS Profile screen (Section 12.2 on page 130) creates preset WDS configurations that can be used
by the NWA/WAC.
12.2 WDS Profile
This screen allows you to manage and create WDS profiles that can be used by the APs. To access this
screen, click Configuration > Object > WDS Profile.
Figure 82 Configuration > Object > WDS Profile
The following table describes the labels in this screen.
Table 61 Configuration > Object > WDS Profile
LABEL DESCRIPTION
Add Click this to add a new profile.
Edit Click this to edit the selected profile.
Remove Click this to remove the selected profile.
# This field is a sequential value, and it is not associated with a specific profile.
Profile Name This field indicates the name assigned to the profile.
WDS SSID This field shows the SSID specified in this WDS profile.
To Next Page
Loading...
