Chapter 15 Log and Report
NWA / WAC Series User’s Guide
176
Alternatively, if you want to edit what events is included in each log, you can also use the Active Log
Summary screen to edit this information for all logs at the same time.
15.3.1 Log Setting Screen
To access this screen, click Configuration > Log & Report > Log Setting.
Figure 113 Configuration > Log & Report > Log Setting
The following table describes the labels in this screen.
Table 81 Configuration > Log & Report > Log Setting
LABEL DESCRIPTION
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
# This field is a sequential value, and it is not associated with a specific log.
Status This field shows whether the log is active or not.
Name This field displays the name of the log (system log or one of the remote servers).
To Next Page
Loading...
