EasyManuals Logo

ZyXEL Communications WAP3205 - QUICK GUIDE V2.0 User Manual

ZyXEL Communications WAP3205 - QUICK GUIDE V2.0
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
ENGLISH
7
1. Make the following hardware connections to set up
your WAP3205:
Connect the antennas (A) to the antenna sockets,
ensuring they are screwed in firmly and angled
upwards.
Connect the Ethernet port on your computer to a LAN
port (B) on the WAP3205 using an Ethernet cable.
Connect another LAN port (C) on your WAP3205 to
the Ethernet port on the device with which you are
accessing the Internet (for example, a modem) using
an Ethernet cable.
Use the power adapter (D) from the package to
connect the POWER socket to an appropriate power
source.
2. Check your Internet connection. Open a web
browser on your computer and enter www.zyxel.com
in the address bar.
If you cannot access the Internet, make sure the
WAP3205’s IP address is in the same subnet as
your broadband modem or router and restart your
WAP3205. See the User’s Guide for information
on setting up the WAP3205’s IP address.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ZyXEL Communications WAP3205 - QUICK GUIDE V2.0 and is the answer not in the manual?

ZyXEL Communications WAP3205 - QUICK GUIDE V2.0 Specifications

General IconGeneral
BrandZyXEL Communications
ModelWAP3205 - QUICK GUIDE V2.0
CategoryWireless Access Point
LanguageEnglish

Related product manuals