To Next PageTo Next Page
Need help?Do you have a question about the ZyXEL Communications NWA5121-N and is the answer not in the manual?
General| Frequency band | 2.412 - 2.472 GHz |
|---|---|
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1ag, IEEE 802.3, IEEE 802.3af, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 300 Mbit/s |
| Quality of Service (QoS) support | Yes |
| Internal | No |
| WAN connection | Ethernet (RJ-45) |
| Ethernet LAN (RJ-45) ports | 1 |
| Security algorithms | WEP, WPA, WPA2, WPA2-PSK |
| Package depth | 207 mm |
| Package width | 282 mm |
| Package height | 71 mm |
| Storage temperature (T-T) | -30 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Input current | 1 A |
| AC input voltage | 12 V |
| Antenna features | Detachable antenna |
| Antennas quantity | 2 |
| Antenna gain level (max) | 3 dBi |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Width | 130 mm |
|---|---|
| Height | 54.5 mm |
| Weight | 610 g |
Explains NWA/WAC operating modes: standalone AP and managed AP.
Explains the procedures for safely starting and stopping the device.
Guides users on how to access the Web Configurator interface.
Describes the main Dashboard screen displaying device info, system status, and resource usage.
Discusses NWA/WAC participation in standalone or CAPWAP network modes.
Guides users on configuring the IP address for the NWA/WAC.
Details NWA/WAC VLAN settings for network segmentation.
Configures AC Discovery for NWA/WAC management by an AP controller.
Manages the NWA/WAC's general wireless settings.
Configures network traffic load balancing between APs.
Controls default settings, login, lockout, and other user configurations.
Creates radio profiles for configuring the NWA/WAC's radio transmitter(s).
Configures profiles for wireless network signals broadcast by APs.
Manages wireless security configurations used by SSIDs.
Details using SSH for secure access to the NWA/WAC command line.
Controls log messages and alerts, including email and syslog settings.
Stores, names, downloads, and uploads configuration files.
Checks firmware version and uploads firmware to the NWA/WAC.
Generates a file with configuration and diagnostic info for support.
Allows remote users to restart the NWA/WAC device.
Provides instructions to shut down the NWA/WAC device properly.
Addresses problems related to power, connections, and LED behavior.
Troubleshoots issues accessing the device's login screen or interface.
Guides on resetting the NWA/WAC to its factory default settings.
