To Next PageTo Next Page
Need help?Do you have a question about the ZyXEL Communications NWA50AX and is the answer not in the manual?
General| 2.4 GHz | Yes |
|---|---|
| MIMO type | Multi User MIMO |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3at |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 1775 Mbit/s |
| Maximum data transfer rate (5 GHz) | 1200 Mbit/s |
| Maximum data transfer rate (2.4 GHz) | 575 Mbit/s |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Input current | 0.3 A |
| Output current | 1.5 A |
| Output voltage | 12 V |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Number of products included | 1 pc(s) |
| Security algorithms | WPA, WPA2, WPA3 |
| Antenna type | Internal |
| Antenna gain level (max) | 4 dBi |
| Placement | Ceiling, Wall |
| Product color | White |
| USB 2.0 ports quantity | - |
| Ethernet LAN (RJ-45) ports | 1 |
| Country of origin | China |
| Master (outer) case width | 315 mm |
| Master (outer) case height | 332 mm |
| Master (outer) case length | 483 mm |
| Master (outer) case weight | 13000 g |
| Harmonized System (HS) code | 85176990 |
| Quantity per master (outer) case | 20 pc(s) |
Weight and Dimensions| Width | 140 mm |
|---|---|
| Height | 37.5 mm |
| Weight | 290 g |
Explains how warnings and notes are presented in the guide.
Details conventions for syntax used in the guide.
Illustrates generic icons used throughout the guide.
Introduces the Zyxel Device's management methods and wireless capabilities.
Describes the different roles a Zyxel Device can perform within a network.
Describes using the Zyxel Device as an RF monitor to detect APs.
Presents scenarios and topologies for Zyxel Device setup.
Lists and describes the features of the Zyxel Device.
Explains the management modes for the Zyxel Device (NCC or Standalone).
Introduces ZON Utility for efficient device deployment and management.
Provides best practices for secure and effective device management.
Explains the function and control of the Zyxel Device's single LED.
Details the LED indicators and their meanings.
Introduces the HTML-based management interface and browser requirements.
Steps to connect to and access the Web Configurator.
Explains how to navigate the Web Configurator interface.
Information on manipulating tables and lists in the Web Configurator.
Introduces standalone mode and connecting wireless clients.
Provides methods for safely starting and stopping the Zyxel Device.
Describes the dashboard displaying device information and status widgets.
Displays a chart of the Zyxel Device's recent CPU usage.
Guides through configuring IP address, time, and radio settings.
Enables, disables, or edits SSID profiles for wireless networks.
Displays Ethernet interface information and packet statistics.
Shows statistics for the Zyxel Device's wireless radio transmitters.
Displays statistics for associated wireless clients.
Views information about surrounding APs to mark as Rogue or Friendly.
Accesses system and debugging logs for viewing and analysis.
Configures the Zyxel Device's LAN IP address.
Discusses how to configure the Zyxel Device's VLAN settings.
Configures proxy server settings for NCC discovery.
Manages general wireless settings for the Zyxel Device.
Enables Rogue AP Detection and manages AP lists.
Configures dynamic radio channel selection.
Displays a summary of all user accounts.
Controls default settings, login, lockout, and other user preferences.
Allows creation of radio profiles for Zyxel Device transmitters.
Configures SSID lists, security lists, and MAC filter lists.
Manages wireless security configurations for SSIDs.
Manages security configurations using MAC addresses for SSIDs.
Creates preset monitor mode configurations for APs.
Manages and creates WDS profiles for APs.
Explains using certificates for user authentication.
Displays a summary list of certificates and certification requests.
Displays certificates accepted as trusted by the Zyxel Device.
Provides technical information on OCSP for certificate validation.
Configures a unique name for the Zyxel Device on the network.
Sets the system time and date, manually or via a time server.
Explains secure and insecure management access via WAN.
Guides on using SSH for secure command-line access.
Uploads and downloads firmware and configuration files using FTP.
Controls log messages, alerts, and e-mail configurations.
Configures detailed settings for system logs and e-mail profiles.
Controls settings for each log entry on a remote syslog server.
Stores, runs, and names configuration files, allowing download/upload.
Checks current firmware version and uploads new firmware.
Uses shell scripts for device commands and configuration.
Generates a file with configuration and diagnostic information for support.
Captures network traffic for analysis with packet analyzers.
Controls how device LEDs behave after the device is ready.
Identifies the device's location in the network by blinking the Locator LED.
Allows remote users to restart the Zyxel Device.
Shuts down the Zyxel Device by writing cached data and stopping processes.
Describes device management and provisioning via NCC in cloud mode.
Lists available Web Configurator screens in NCC managed mode.
Configures the Zyxel Device's LAN IP address.
Discusses configuring the Zyxel Device's VLAN settings.
Stores, names, downloads, uploads, and runs shell script files.
Generates a diagnostic file for customer support troubleshooting.
Views current log messages when disconnected from NCC.
Addresses issues related to power, connections, and LED behavior.
Troubleshoots issues with IP address, access, and login.
Troubleshoots client inability to access the Internet.
Troubleshoots WLAN access and security issues.
Procedure to reset the Zyxel Device to factory default settings.
Guides on exporting a certificate from the Web Configurator.
Installs a certificate as a trusted root certification authority.
Explains IPv6 address formats and abbreviations.
Describes automatic IPv6 address generation without DHCP server.
Lists necessary information to provide when contacting support.
Details FCC compliance and operational conditions for the device.
