NWA50AX User’s Guide
49
C HAPTER 7
Se tup Wiza rd
7.1 Ac c e ssing the Wiza rd
When you log into the Web Configurator for the first time or when you reset the Zyxel Device to its
default configuration, the wizard screen displays.
Note: If you have already configured the wizard screens and want to open it again, click the
Wiza rd icon on the upper right corner of any Web Configurator screen.
7.2 Using the Wiza rd
This wizard helps you configure the Zyxel Device IP address, change time zone, daylight saving and
radio settings, and edit an SSID profile to change general wireless and wireless security settings.
7.2.1 Ste p 1 Tim e Se tting s
Use this screen to configure the Zyxel Device’s country code, time zone and daylight saving time.
• C o untry Co de : Select the country where the Zyxel Device is located.
Note: The country code field is not available and you cannot change the country code if the
Zyxel Device products comply with the U.S. laws, policies and regulations and are to be
sold to the U.S. market.
• Tim e Zo ne : Select the time zone of your location. This will set the time difference between your time
zone and Greenwich Mean Time (GMT).
• Ena ble Da ylig ht Sa ving : Select the option if you use Daylight Saving Time. Configure the day and time
when Daylight Saving Time starts and ends.
• O ffse t allows you to specify how much the clock changes when daylight saving begins and ends.
Enter a number from 1 to 5.5 (by 0.5 increments).
Click Ne xt to proceed. Click Ca nc e l to close the wizard without saving.
To Next Page
Loading...
