Chapter 23 Cloud Mode
NWA50AX User’s Guide
187
• Ma inte na nc e > She ll Sc ript
• Ma inte na nc e > Dia g no stic s
• Ma inte na nc e > Lo g
These screens also have fewer options than those in standalone Zyxel Devices. The rest of the Zyxel
Device’s features must be configured through the NCC.
23.3 Da shb o a rd
This screen displays general AP information, and client information in widgets that you can re-arrange to
suit your needs. You can also collapse, refresh, and close individual widgets.
Fig ure 115 Dashboard
The following table describes the labels in this screen.
Table 78 Dashboard
LABEL DESCRIPTIO N
AP Information
MAC Address This field displays the MAC address of the Zyxel Device.
Serial Number This field displays the serial number of the Zyxel Device.
Product Model This field displays the model name of the Zyxel Device.
2.4G Channel
Information
This field displays the channel number the Zyxel Device is using and its output power in the
2.4 GHz spectrum. This shows Not a c tiva te d if the wireless LAN is disabled.
5G Channel
Information
This field displays the channel number the Zyxel Device is using and its output power in the 5
GHz spectrum. This shows No t a c tiva te d if the wireless LAN is disabled.
Ethernet This field displays whether the Zyxel Device’s Ethernet port is connected and the IP address
of the gateway to which the Zyxel Device is connected.
Internet This field displays whether the Zyxel Device is connecting to the Internet.
Nebula
Connectivity
Status
This field displays whether the Zyxel Device can connect to the Zyxel Nebula Control Center
(NCC).
To Next Page
Loading...
