NWA50AX User’s Guide
183
C HAPTER 21
Re bo o t
21.1 O ve rvie w
Use this screen to restart the Zyxel Device.
21.1.1 Wha t Yo u Ne e d To Kno w
If you applied changes in the Web Configurator, these were saved automatically and do not change
when you reboot. If you made changes in the CLI, however, you have to use the write command to
save the configuration before you reboot. Otherwise, the changes are lost when you reboot.
Reboot is different to reset; reset returns the Zyxel Device to its default configuration.
21.2 Re bo o t
This screen allows remote users can restart the Zyxel Device. To access this screen, click Ma inte na nc e >
Re b o o t.
Fig ure 112 Maintenance > Reboot
Click the Re b o o t button to restart the Zyxel Device. Wait a few minutes until the login screen appears. If
the login screen does not appear, type the IP address of the Zyxel Device in your Web browser.
You can also use the CLI command reboot to restart the Zyxel Device.
To Next Page
Loading...
