Chapter 20 LEDs
NWA50AX User’s Guide
182
Fig ure 111 Maintenance > LEDs > Locator
The following table describes fields in the above screen.
Table 77 Maintenance > LED > Locator
LABEL DESCRIPTION
Turn On
Turn Off
Click Turn O n button to activate the locator. The Locator function will show the actual
location of the Zyxel Device between several devices in the network.
Otherwise, click Turn O ff to disable the locator feature.
Automatically Extinguish
After
Enter a time interval between 1 and 60 minutes to stop the locator LED from blinking.
Default is 10 minutes.
Apply Click Apply to save changes in this screen.
Refresh Click Re fre sh to update the information in this screen.
To Next Page
Loading...
