Chapter 11 User
NWA50AX User’s Guide
87
11.2 Use r Summ a ry
The Use r screen provides a summary of all user accounts. To access this screen click Co nfig ura tion >
O b je c t > Use r.
Fig ure 53 Configuration > Object > User
The following table describes the labels in this screen.
11.2.1 Add/ Edit Use r
The Use r Add/ Edit screen allows you to create a new user account or edit an existing one.
11.2.1.1 Rule s for Use r Na me s
Enter a user name from 1 to 31 characters.
The user name can only contain the following characters:
• Alphanumeric A-z 0-9 (there is no unicode support)
• _ [underscores]
Table 33 Configuration > Object > User
LABEL DESCRIPTIO N
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Re m o ve . The Zyxel Device confirms you want to
remove it before doing so.
Object Reference Select an entry and click O bje c t Re fe re nc e to open a screen that shows which settings use
the entry.
# This field is a sequential value, and it is not associated with a specific user.
User Name This field displays the user name of each user.
User Type This field displays type of user this account was configured as.
• a dm in - this user can look at and change the configuration of the Zyxel Device
• limite d- a dm in - this user can look at the configuration of the Zyxel Device but not to
change it
• use r - this user has access to the Zyxel Device’s services but cannot look at the
configuration
Description This field displays the description for each user.
To Next Page
Loading...
