NWA50AX User’s Guide
75
C HAPTER 10
Wire le ss
10.1 O ve rvie w
This chapter discusses how to configure the wireless network settings in your Zyxel Device.
The following figure provides an example of a wireless network.
Fig ure 43 Example of a Wireless Network
The wireless network is the part in the blue circle. In this wireless network, devices A and B are called
wireless clients. The wireless clients use the access point (AP) to interact with other devices (such as the
printer) or with the Internet. Your Zyxel Device is the AP.
10.1.1 Wha t Yo u C a n Do in this C ha pte r
• The AP Ma na g e m e nt screen (
Section 10.2 on page 76) allows you to manage the Zyxel Device’s
general wireless settings.
• The Ro g ue AP screen (Section 10.3 on page 79) allows you to assign APs either to the rogue AP list or
the friendly AP list.
• The Lo a d Ba la nc ing screen (Section 10.4 on page 83) allows you to configure network traffic load
balancing between the APs and the Zyxel Device.
• The DCS screen (Section 10.4 on page 83) allows you to configure dynamic radio channel selection.
To Next Page
Loading...
