Chapter 25 Maintenance
NWA50AX User’s Guide
193
Each field is described in the following table.
25.3 Dia g no stic s
This screen provides an easy way for you to generate a file containing the Zyxel Device’s configuration
and diagnostic information. You may need to generate this file and send it to customer support during
troubleshooting. All categories of settings and shell script files stored on the Zyxel Device will be included
in the diagnostic file.
Click Ma inte na nc e > Dia g no stic s to open the Dia g no stic s screen. Click Co lle c t Now to have the Zyxel
Device create a new diagnostic file.
Table 81 Maintenance > Shell Script
LABEL DESC RIPTIO N
Rename Use this button to change the label of a shell script file on the Zyxel Device.
You cannot rename a shell script to the name of another shell script in the Zyxel Device.
Click a shell script’s row to select it and click Re na m e to open the Re na m e File screen.
Specify the new name for the shell script file. Use up to 25 characters (including a-zA-Z0-
9;‘~!@#$%^&()_+[]{}’,.=-).
Click O K to save the duplicate or click Ca nc e l to close the screen without saving a duplicate of the
configuration file.
Remove Click a shell script file’s row to select it and click De le te to delete the shell script file from the Zyxel
Device.
A pop-up window asks you to confirm that you want to delete the shell script file. Click O K to delete
the shell script file or click Ca nc e l to close the screen without deleting the shell script file.
Download Click a shell script file’s row to select it and click Downloa d to save the configuration to your
computer.
Copy Use this button to save a duplicate of a shell script file on the Zyxel Device.
Click a shell script file’s row to select it and click Co py to open the C o py File screen.
Specify a name for the duplicate file. Use up to 25 characters (including a-zA-Z0-
9;‘~!@#$%^&()_+[]{}’,.=-).
Click O K to save the duplicate or click Ca nc e l to close the screen without saving a duplicate of the
configuration file.
# This column displays the number for each shell script file entry.
File Name This column displays the label that identifies a shell script file.
Size This column displays the size (in KB) of a shell script file.
Last
Modified
This column displays the date and time that the individual shell script files were last changed or
saved.
Upload Shell
Script
The bottom part of the screen allows you to upload a new or previously saved shell script file from
your computer to your Zyxel Device.
File Type in the location of the file you want to upload in this field or click Bro wse ... to find it.
Browse... Click Browse ... to find the .zysh file you want to upload.
Upload Click Uploa d to begin the upload process. This process may take up to several minutes.
To Next Page
Loading...
