EasyManua.ls Logo

ZyXEL Communications NWA50AX - Port Statistics Graph

ZyXEL Communications NWA50AX
256 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 8 Monitor
NWA50AX User’s Guide
56
8.3.1 Po rt Sta tistic s G ra ph
Use the port statistics graph to look at a line graph of packet statistics for the Ethernet port. To view, click
Mo nitor > Ne two rk Sta tus and then the Switc h to G ra phic Vie w button.
Set Interval Click this to set the Po ll Inte rva l the screen uses.
Stop Click this to stop the window from updating automatically. You can start it again by setting the
Po ll Inte rva l and clicking Se t Inte rva l.
Switch to Graphic
View
Click this to display the port statistics as a line graph.
Name This field displays the name of the interface.
Status This field displays the current status of the physical port.
Down - The physical port is not connected.
Spe e d / Duple x - The physical port is connected. This field displays the port speed and duplex
setting (Full or Ha lf).
TxPkts This field displays the number of packets transmitted from the Zyxel Device on the physical port
since it was last connected.
RxPkts This field displays the number of packets received by the Zyxel Device on the physical port
since it was last connected.
Tx Bcast This field displays the number of broadcast packets transmitted from the Zyxel Device on the
physical port since it was last connected.
Rx Bcast This field displays the number of broadcast packets received by the Zyxel Device on the
physical port since it was last connected.
Collisions This field displays the number of collisions on the physical port since it was last connected.
Tx This field displays the transmission speed, in bytes per second, on the physical port in the one-
second interval before the screen updated.
Rx This field displays the reception speed, in bytes per second, on the physical port in the one-
second interval before the screen updated.
Up Time This field displays how long the physical port has been connected.
System Up Time This field displays how long the Zyxel Device has been running since it last restarted or was
turned on.
Table 17 Monitor > Network Status (continued)
LABEL DESCRIPTIO N

Table of Contents

Related product manuals