Chapter 11 User
NWA50AX User’s Guide
89
11.3 Se tting
This screen controls default settings, login settings, lockout settings, and other user settings for the Zyxel
Device.
To access this screen, login to the Web Configurator, and click C o nfig ura tion > O b je c t > Use r > Se tting .
Authentication
Timeout Settings
This field is not available if the user type is use r.
If you want to set authentication timeout to a value other than the default settings, select
Use Ma nua l Se tting s then fill your preferred values in the fields that follow.
Lease Time This field is not available if the user type is use r.
Enter the number of minutes this user has to renew the current session before the user is
logged out. You can specify 1 to 1440 minutes. You can enter 0 to make the number of
minutes unlimited. Admin users renew the session every time the main screen refreshes in the
Web Configurator.
Reauthentication
Time
This field is not available if the user type is use r.
Type the number of minutes this user can be logged into the Zyxel Device in one session
before the user has to log in again. You can specify 1 to 1440 minutes. You can enter 0 to
make the number of minutes unlimited. Unlike Le a se Time , the user has no opportunity to
renew the session without logging out.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Ca nc e l to exit this screen without saving your changes.
Table 34 Configuration > User > User > Add/Edit A User (continued)
LABEL DESC RIPTIO N
To Next Page
Loading...
