Chapter 16 System
NWA50AX User’s Guide
155
Fig ure 95 SSH Example 2: Test
2 Enter “ssh –2 192.168.1.2”. This command forces your computer to connect to the Zyxel Device
using SSH version 1. If this is the first time you are connecting to the Zyxel Device using SSH, a message
displays prompting you to save the host information of the Zyxel Device. Type “yes” and press [ENTER].
Then enter the password to log in to the Zyxel Device.
Fig ure 96 SSH Example 2: Log in
3 The CLI screen displays next.
16.6 FTP
You can upload and download the Zyxel Device’s firmware and configuration files using FTP. To use this
feature, your computer must have an FTP client. See
Chapter 18 on page 167 for more information
about firmware and configuration files.
To change your Zyxel Device’s FTP settings, click Co nfig ura tion > Syste m > FTP tab. The screen appears
as shown. Use this screen to specify FTP settings.
Fig ure 97 Configuration > System > FTP
$ telnet 192.168.1.2 22
Trying 192.168.1.2...
Connected to 192.168.1.2.
Escape character is '^]'.
SSH-1.5-1.0.0
$ ssh –2 192.168.1.2
The authenticity of host '192.168.1.2 (192.168.1.2)' can't be established.
RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.2' (RSA1) to the list of known hosts.
Administrator@192.168.1.2's password:
To Next Page
Loading...
