Chapter 7 Setup Wizard
NWA50AX User’s Guide
50
Fig ure 23 Wizard: Time Settings
7.2.2 Ste p 2 Pa ssword a nd Uplink C o nne c tio n
Use this screen to configure the Zyxel Device’s system password and IP address.
C ha ng e Pa sswo rd: Enter a new password and retype it to confirm.
Uplink C onne c tion: Select Auto (DHCP) if the Zyxel Device is connected to a router with the DHCP server
enabled. You then need to check the router for the IP address assigned to the Zyxel Device in order to
access the Zyxel Device’s Web Configurator again.
Otherwise, select Sta tic IP when the Zyxel Device is NOT connected to a router or you want to assign it a
fixed IP address. You will need to manually enter:
• the Zyxel Device’s IP address and subnet mask.
• the IP address of the router that helps forward traffic.
• a DNS server's IP address. The Domain Name System (DNS) maps a domain name to an IP address
and vice versa. The DNS server is extremely important because without it, you must know the IP
address of a computer before you can access it.
Click Pre v to return to the previous screen. Click Ne xt to proceed. Click C a nc e l to close the wizard
without saving.
To Next Page
Loading...
