Chapter 7 Setup Wizard
NWA50AX User’s Guide
51
Fig ure 24 Wizard: Change Password and Uplink Connection
7.2.3 Ste p 3 Ra dio
Use this screen to configure the Zyxel Device’s radio transmitter(s).
• C ha nne l Se le c tion: Select Auto to have the Zyxel Device automatically choose a radio channel that
has least interference. Otherwise, select Ma nua l and specify a channel the Zyxel Device will use in the
2.4 GHz or 5 GHz wireless LAN. The options vary depending on the frequency band and the country
you are in.
• Ma ximum O utput Powe r: Enter the maximum output power of the Zyxel Device. If there is a high
density of APs in an area, decrease the output power of the Zyxel Device to reduce interference with
other APs.
Note: Reducing the output power also reduces the Zyxel Device’s effective broadcast radius.
Click Pre v to return to the previous screen. Click Ne xt to proceed. Click C a nc e l to close the wizard
without saving.
Fig ure 25 Wizard: Radio
To Next Page
Loading...
