Chapter 12 AP Profile
NWA50AX User’s Guide
95
Fig ure 57 Configuration > Object > AP Profile > Radio
The following table describes the labels in this screen.
12.2.1 Add/ Edit Ra dio Pro file
This screen allows you to create a new radio profile or edit an existing one. To access this screen, click
the Add button or select a radio profile from the list and click the Edit button.
Table 37 Configuration > Object > AP Profile > Radio
LABEL DESCRIPTIO N
Add Click this to add a new radio profile.
Edit Click this to edit the selected radio profile.
Remove Click this to remove the selected radio profile.
Activate To turn on an entry, select it and click Ac tiva te .
Inactivate To turn off an entry, select it and click Ina c tiva te .
Object
Reference
Click this to view which other objects are linked to the selected radio profile.
# This field is a sequential value, and it is not associated with a specific user.
Status This field shows whether or not the entry is activated.
A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active.
Profile Name This field indicates the name assigned to the radio profile.
Frequency Band This field indicates the frequency band which this radio profile is configured to use.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Re se t to return the screen to its last-saved settings.
To Next Page
Loading...
