Chapter 9 Network
NWA50AX User’s Guide
73
9.4 NC C Disc o ve ry
You can manage the Zyxel Device through the Zyxel Nebula Control Center (NCC). Use this screen to
configure the proxy server settings if the Zyxel Device is behind a proxy server.
To access this screen, click C o nfig ura tio n > Ne two rk > NC C Disc o ve ry.
Status This field indicates whether the port is enabled (a yellow bulb) or not (a gray bulb).
Port This field displays the name of the port.
PVID This field displays the port number of the VLAN ID.
VLAN Configuration
Add Click this to create a new entry. For features where the entry’s position in the numbered list is
important (features where the Zyxel Device applies the table’s entries in order like the SSID
for example), you can select an entry and click A d d to create a new entry after the
selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings. In some tables you can just click a table entry and edit it directly in the
table. For those types of tables small red triangles display for table entries with changes that
you have not yet applied.
Remove To remove an entry, select it and click Re m o ve . The Zyxel Device confirms you want to
remove it before doing so.
Activate/
Inactivate
To turn on an entry, select it and click Ac tiva te . To turn off an entry, select it and click
Ina c tiva te .
# This is the index number of the VLAN ID.
Status This field indicates whether the VLAN is enabled (a yellow bulb) or not (a gray bulb).
Name This field displays the name of each VLAN.
VID This field displays the VLAN ID.
Member This field displays the VLAN membership to which the port belongs.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Re se t to return the screen to its last-saved settings.
Table 26 Configuration > Network > VLAN (continued)
LABEL DESCRIPTIO N
To Next Page
Loading...
