NWA50AX User’s Guide
23
Note: To check for your Windows operating system version, right-click on My C o m pute r >
Pro pe rtie s. You should see this information in the G e ne ra l tab.
Note: It is suggested that you install Npcap, the packet capture library for Windows operating
systems, and remove WinPcap or any other installed packet capture tools before you
install the ZON utility.
Ha rdwa re
Here are the minimum hardware requirements to use the ZON Utility on your PC.
• Core i3 processor
•2 GB RAM
• 100 MB free hard disk
• WXGA (Wide XGA 1280x800)
2.3.2 Run the ZO N Utility
1 Double-click the ZON Utility to run it.
2 The first time you run the ZON Utility, you will see if your device and firmware version support the ZON
Utility. Click the O K button to close this screen.
Fig ure 6 Supported Devices and Versions
If you want to check the supported models and firmware versions later, you can click the Sho w
informa tion a b o ut ZON icon in the upper right hand corner of the screen. Then select the Suppo rte d
To Next Page
Loading...
