ZyXEL Communications NWA50AX - 10.4 DCS

Chapter 10 Wireless
NWA50AX User’s Guide
83
10.3.1 Add/ Edit Ro g ue / Frie ndly List
Click Ad d or select an AP and click the Edit button in the Co nfig ura tion > Wire le ss > Ro g ue AP table to
display this screen.
Fig ure 48 Configuration > Wireless > Rogue AP > Add/Edit Rogue/Friendly AP List
Each field is described in the following table.
10.4 DCS
Use this screen to configure dynamic radio channel selection (see
Dynamic Channel Selection (DCS) on
page 76
). Click C o nfigura tion > Wire le ss > DC S to access this screen.
Role This field indicates whether the selected AP is a ro g ue - a p or a frie ndly- a p. To change the
AP’s role, click the Ed it button.
MAC Address This field indicates the AP’s radio MAC address.
Description This field displays the AP’s description. You can modify this by clicking the Edit button.
Rogue/Friendly AP List
Importing/Exporting
These controls allow you to export the current list of rogue and friendly APs or import
existing lists.
File Path / Browse /
Importing
Enter the file name and path of the list you want to import or click the Bro wse button to
locate it. Once the File Pa th field has been populated, click Im po rting to bring the list into
the Zyxel Device.
You need to wait a while for the importing process to finish.
Exporting Click this button to export the current list of either rogue APs or friendly APS.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Re se t to return the screen to its last-saved settings.
Table 29 Configuration > Wireless > Rogue AP (continued)
LABEL DESCRIPTION
Table 30 Configuration > Wireless > Rogue AP > Add/Edit Rogue/Friendly AP List
LABEL DESCRIPTIO N
MAC Enter the MAC address of the AP you want to add to the list. A MAC address is a unique
hardware identifier in the following hexadecimal format: xx:xx:xx:xx:xx:xx where xx is a
hexadecimal number separated by colons.
Description Enter up to 60 characters for the AP’s description. Spaces and underscores are allowed.
Role Select either Rog ue A P or Frie ndly AP for the AP’s role.
OK Click O K to save your changes back to the Zyxel Device.
Cancel Click C a nc e l to close the window with changes unsaved.