Chapter 2 The Web Configurator
NWA5000 / WAC6500 Series User’s Guide
34
Maintenance Menu
Use the maintenance menu screens to manage configuration and firmware files, run diagnostics,
and reboot or shut down the NWA/WAC.
2.3.3 Warning Messages
Warning messages, such as those resulting from misconfiguration, display in a pop up window.
Figure 15 Warning Message
Date/Time Configure the current date, time, and time zone in the NWA/WAC.
WWW Configure HTTP, HTTPS, and general authentication.
SSH Configure SSH server and SSH service settings.
TELNET Configure telnet server settings for the NWA/WAC.
FTP Configure FTP server settings.
SNMP Configure SNMP communities and services.
Log & Report
Email Daily
Report
Configure where and how to send daily reports and what reports
to send.
Log Setting Configure the system log, e-mail logs, and remote syslog servers.
Table 15 Maintenance Menu Screens Summary
FOLDER OR LINK TAB FUNCTION
File Manager Configuration File Manage and upload configuration files for the NWA/WAC.
Firmware Package View the current firmware version and to upload firmware.
Shell Script Manage and run shell script files for the NWA/WAC.
Diagnostics Diagnostics Collect diagnostic information.
LEDs Suppression Enable this feature to keep the LEDs off after the NWA/WAC
starts.
Locator Enable this feature to see the actual location of the NWA/WAC
between several devices in the network.
Reboot Restart the NWA/WAC.
Shutdown Turn off the NWA/WAC.
Table 14 Configuration Menu Screens Summary (continued)
FOLDER OR LINK TAB FUNCTION
To Next Page
Loading...
