ZyXEL Communications WAP3205 - Page 4

6
Set Up a WPS Connection
Use Wi-Fi Protected Setup (WPS) to let
WPS-enabled wireless devices securely
access the WAP3205.
 If WPS is not working or your wireless device
does not support WPS, go to the next section.
1. Place a WPS-enabled
wireless device (B)
within range of the
WAP3205 (A).
2. Press the WPS button
for two to three seconds
on the WAP3205. The
WPS light () on the
WAP3205 blinks.
3. Press the WPS button
on the wireless device
within two minutes of
pressing the button on
the WAP3205.
4. The WPS light () on
the WAP3205 shines
steadily when the WPS
process is finished.
A
A
B