ZyXEL Communications WX Series - 7.10 AP List Screen

Chapter 7 Wireless
WX Series User’s Guide
116
7.10 AP List Screen
You can use this screen to select an AP and enter its WiFi password to connect to the WiFi network.
Click Network Setting > Wireless > AP List. The screen appears as shown.
Note: The AP List is available when you select 5 GHz WiFi connection. (See Section 7.2 on
page 98).
Figure 53 Network Setting > Wireless > AP List
WPS Setup
WPS Select this to activate or deactivate the WPS method.
Click WPS button Click this to connect the WX Device to the AP using the WPS method.
Apply Click Apply to save your changes.
Cancel Click Cancel to begin configuring this screen afresh.
Table 29 Network Setting > Wireless > Operating Modes (continued)
LABEL DESCRIPTION