Chapter 2 Hardware
WX Series User’s Guide
27
Figure 18 WX5600-T0 / WX3100 Screw Specifications
1 Attach the bracket to the back of the WX5600-T0 / WX3100-T0 as shown.
Figure 19 Attach the bracket
2 Drill a hole in the wall. Insert the screw anchor and screw into the hole.
3 Place the WX5600-T0 / WX3100-T0 so the wall mount hole lines up with the screw. Slide the WX5600-T0 /
WX3100-T0 down gently to fix it into place.
Table 8 WX5600-T0 / WX3100 Wall Mounting Information
M4 Screws One
Screw anchors (optional) One
To Next Page
Loading...
