Need help?Do you have a question about the 1&1 AVM FRITZ!Box 7520 and is the answer not in the manual?
General| Brand | 1&1 |
|---|---|
| Model | AVM FRITZ!Box 7520 |
| Category | Network Router |
| Language | English |
Steps 1-3: Handling SIM card formats, removing micro SIM, and preparing the antenna.
Steps 4-7: Inserting SIM, securing, closing, and connecting the antenna to the HomeServer.
Placing the 1&1 LTE-Antenne into a USB port on the 1&1 HomeServer.
Connecting the 1&1 HomeServer to power and observing the 'Power/DSL' light indicator.
Connecting the 1&1 HomeServer to a computer using a network cable.
Instructions to connect a computer to the 1&1 HomeServer wirelessly.
Opening the FRITZ!Box interface and entering the device password.
Choosing the LTE/HSPA+ antenna for internet access and proceeding.
Inputting the SIM card PIN and continuing the setup process.
Entering the mobile number and area code from the login details letter.
Entering the 12-character 1&1 Start-Code to complete the setup process.
Preparing for the DSL connection by connecting the DSL cable before the specified time.
Connecting the DSL cable to the designated DSL/Tel port on the 1&1 HomeServer.
To Next Page
