MACRO FUNCTIONS
Navigate to the “Advanced Setting” menu. This is where you can
create and save your macro combinations.
To create a new macro, the procedure must be as follows:
1) On the “Name” field enter the intended macro designation;
2) Press the “New” button;
3) Press the “Record” button;
4) Enter the intended macro combination;
5) Press the “Stop” button to finish the recording;
6) Press the “Save” button to store the recorded macro.
If your macro combination turned out too slow or too fast, you can
adjust its delay time. In order to do so, right click over the macro
EN
To Next Page
Loading...
General