2in1 SMART - Meter Safety Instructions

Cautions
12
• Don’t drop the blood sample on the surface of test strip
directly.
• Do not press test strip against your finger. It may aect bad
aspiration of blood sample.
• Do not use a test strip that looks damaged and/or used. Test
strips are for single use only.
• Store the test strips in their original vial.
• After you take a strip out of the vial, be sure to use it within
three minutes.
• Use test strips within 3 months (90 days) after opening the
vial cap.
• By clean and dry hands, you may touch when taking out test
strip and/or insert to port.
• Do not bend, cut, or modify test strips.
Cautions for Meter
• Keep the 2in1. SMART out of children’s reach. If a children
swallows meter accidentally, consult with a doctor
immediately.
• Do not disassemble or modify the meter.
• Do not attempt to severe shock, drop or step on 2in1. SMART.
• The 2in1. SMART is not waterproof. Do not wash with water or
touch by wet hands.
• Do not wipe the 2in1. SMART with Chemical solvents, or abra-
sive cleaners.
• Avoid the 2in1. SMART being exposed to high temperature,
high humidity, rain and/or dust when using or storing.
• When your 2in1. SMART has been exposed to extreme
temperature, do not test until the 2in1. SMART reach to room
temperature for 20 minutes at least.