What to do if the 2in1 Blood Glucose Meter shows insufficient sample?
If your 2in1 Blood Glucose Meter indicates an insufficient sample, repeat the test, ensuring you apply enough sample to completely fill the test strip check window.
How to fix a potential software or hardware issue with my 2in1 Blood Glucose Meter?
To address a potential software or hardware issue with your 2in1 Blood Glucose Meter, first, remove the batteries and then reinsert them to restart the meter. If the problem persists, it may indicate a more serious issue.
What to do if I applied blood before the flashing drop on my 2in1 Blood Glucose Meter?
If you've applied blood or control solution to the test strip before the flashing drop appeared on the display of your 2in1 Blood Glucose Meter, discard the used test strip. Then, repeat the test using a new test strip, making sure to wait for the flashing blood drop icon to appear before applying the sample.
Visual guide to the 2in1. MaX meter and test strip components.
Explanation of symbols and segments on the meter display for functionality checks.
Instructions for setting the meter's time, date, and sound preferences.
Guides users on choosing between Basic (L-1) and Advanced (L-2) operational modes.
Steps to set up hypoglycemia, ketone, and test reminder alarms for better health management.
Procedures for preparing the test strip and lancing device before testing.
Step-by-step guide for obtaining a blood sample and performing the glucose test.
How to mark results, discard used items safely, and understand test outcomes.
Instructions for replacing meter batteries and maintaining the device.
Solutions for common error codes, messages, and operational issues encountered with the meter.
Details on system specs, usage limitations, warranty terms, and index of symbols.
General| Brand | 2in1 |
|---|---|
| Model | Max |
| Category | Blood Glucose Meter |
| Language | English |
To Next Page
