2in1 Max - Troubleshooting Guide

40
Troubleshooting Guide
What You See What It Means
What You Should
Do
Blood or control
solution was
applied to the
test strip before
the flashing drop
appeared on the
display
Discard the test
strip and repeat
the test with a
new test strip.
Wait until you
see the flashing
blood drop
on the display
before testing.
The meter is
sensing a used
or contaminated
test
strip.
Discard the test
strip and repeat
the test with a
new test strip.
Wait until you
see the flashing
blood drop
on the display
before testing.
Incorrect test
strip.
Discard the
test strip and
repeat the test
with a new test
strip. Make sure
that you are
using a 2in1.
MaX test strip
from 2in1. MaX
Laboratories, Inc..