2in1 Max - Page 42

41
Incorrect
sample.
Discard the test
strip and repeat
the test with a
new test strip.
Make sure that
only human fresh
whole blood and
2in1. MaX control
solution can be
used for the test.
Temperature out
of range.
Move to an area
that is within the
operating range
for the meter. Let
the meter djust to
this temperature
for 20 minutes
before
performing a test.
Potential
software or
hardware issue.
Take out batteries
and restart the
meter. If the
problem
continues,
contact your
local dealer.
Insucient
sample.
Repeat test and
apply enough
sample to fill the
test strip check
window.