12
Set the Ketone Warning
After you set the Hypo Alarm, the symbol now will
flash, along with word “On” on the display. Press
or to
turning the Ketone warning function on or o, press
to set.
If you turn this function on, the symbol will appear
when the test result equals or above 300mg/dL (16.7 mmol/L).
Set the Test Alarm Function
The test alarm function reminds you when to test. You can set
up to 5 alarms per day. When the alarm sounds, the
flashes
on the display. The alarm will beep 20 times. You can turn the
alarm o by inserting a test strip to perform a test or pressing
any button to turn the meter o.
To Next Page
Loading...
