2in1 Max - Important Safety Information

5
Notes:
Your 2in1. Max meter is pre-set with beep sound function, the
meter will beep when:
• turn on the meter.
• the test strip is inserted and ready to apply blood or control
solution.
• sucient blood or control solution is pulled into the test
strip.
• the test is complete.
• it is time to perform a test if you set the test alarms.
• if any error occurs during operation.
Important Safety Information
• Always keep the test strips in the original vial. Tightly close
the vial immediately after you have removed the test strip.
• Do not use the meter if it is dropping into water or splashing
water on to it.
• Wash and dry your hands well before and after testing.
• Test strips and lancets are for single use only.
• Do not drop blood directly on the flat surface of the test
strip.
• Check the expiration dates and discard dates on your test
strips vial label and control solution bottle label.
• Use only 2in1. Max test strip with your 2in1. Max system.
• Use only 2in1. Max control solution with your 2in1. Max
system.
• For self-testers, consult your physician or diabetes health
care professional before making any adjustments to your
medication, diet or activity routines.
• If the system is used in a manner not specified by the
manufacturer, the protection provided by the system can be
impaired.