2in1 Max - Using the Meter Memory

32
the foil pouch, your meter or test strips may not be working
properly. DO NOT use the system to test blood. Contact your
dealer for help.
To turn your meter o, just remove the test strip. Dispose
of the used test strips as medical waste. The result will be
automatically marked and stored in the meter memory. Control
results will not included in your blood glucose averages.
Using the Meter Memory
Your meter automatically stores up to 900 results with the
time and date. Test results are stored from the newest to the
oldest. The meter will also calculate the average values of
records from the last 7, 14 and 30 days.
Notes:
• If there are already 900 records in memory, the oldest
record will be erased to make room for a new one.
• It is very important to set the correct time and date in the
meter, please make sure the time and date are correct after
you change your batteries.
• Control results are not included in the 7, 14 and 30 day
average calculation.
Viewing Basic Mode (L-1) Results
When your meter is o, press
to turn meter on after a beep,
a symbol of strip flashes on the display, press
again, the 7
day average will appear in the center of the display with the
number of results shown at the top of the display. If you want
to review the memory after you immediately performed a test,
with the test result on the display, press
to see the 7 day
average.