16
Set up your meter correctly and have all the materials you will
need ready before you begin testing. This including your 2in1.
MaX meter, the 2in1. MaX test strips and lancing device with
lancets.
Preparing the Test Strip
1. Wash and dry your hands well before testing.
2. Remove a test strip from the test strip vial or foil pouch.
Tightly close the vial cap immediately after you have
removed the test strip.
3. Insert the test strip into the meter in the direction of the
arrows. Meter turns on after a beep.
4. A symbol with a test strip with a flashing blood will appear
letting you know the meter is ready to test.
TAKING A TEST
To Next Page
Loading...
