2N Helios IP Force - Additional Modules

2N TELEKOMUNIKACE a.s., www.2n.cz 27/110
Additional Modules
9151010Part No.
Additional switch with normally open/closed
contact and 12 V switched output.
Includes tamper switch.
Enables control of a secondary device, passive
time unlimited switching up to 48 V / 2 A or
active switch 12 V / 700 mA. Also includes
tamper switch to signal opening of the front
panel.
9151011Part No.
Includes tamper switch.
Internal RFID card reader 125 kHz for
installation in intercoms. 2N Helios IP Force
®
Allows the use of EM4100, EM4102 and HID
Proximity cards. Another two switches, two
logical inputs and a Wiegand interface are
available. It is compatible with the 2N Helios
®
two-button and pictogram models. It IP Force
also includes a security switch to signal when
the front panel is opened.
9151016Part No.
Includes tamper switch.
Internal RFID card reader 13.56 MHz for
installation in intercoms. 2N Helios IP Force
®
Two switches, two logical inputs and a
Wiegand interface are available. It is
compatible with the two-2N Helios IP Force
®
button and pictogram models. It also includes a
security switch to signal when the front panel
is opened.
Allows the use 13.56MHz cards of these
standards (only card serial number is read):
Mifare Classic 1k & 4k, DESFire ISO/IEC 14443A
EV1, Mini, Plus S&X, Ultralight, Ultralight C
ISO/IEC 14443B CEPAS, HID iCLASS
JIS X 6319 Felica