2N Helios IP Force - Page 31

2N TELEKOMUNIKACE a.s., www.2n.cz 31/110
Part No. 9159052
Power supply for 2N Induction Loop
®
External power supply for the induction loop.
Input 230V AC
Output 12V DC
Part No. 9134174
Mifare RFID card, 13.56 MHz
Part No. 9159014EU/US/UK
2N 2Wire
®
(set of 2 adaptors and power source for EU/US
/UK)
The converter allows you to use 2N
®
2Wire
existing wiring (2 wires) from your original
door bell or door intercom to connect any IP
device. You don’t have to configure anything,
and you only need one unit at each 2N
®
2Wire
end of the cable and a power source
connected to at least one of these units. The 2N
unit then provides power not only
®
2Wire PoE
to the second converter, but also to all other
connected IP end devices.