Part No. 9137421E
Ext. RFID Reader 13.56MHz + 125kHz (USB
interface)
External RFID card reader for connection to PC
using a USB interface. Suitable for system
administration and adding 13.56MHzand 125kHz
cards using a web interface or the2N
®
application. It reads the Access Commander
same types of cards as card readers in 2N
intercoms.Helios IP
Part No. 9159051
2N Induction loop - external antenna
®
External antenna boosts the range of usability
of the induction loop, so that the disabled user
can receive the audio signal in wider area. Use
an external antenna with the induction loop,
Part No. 9159050. A 170cm long
interconnecting cable is included.
Tip
For more accessories and particular advice please contact your local
distributor of 2N products.
Tip
FAQ: Induction loop - How to connect it with 2N Helios IP
To Next Page
Loading...
